Tangent Suspension Clamp and Single Preformed Rod Suspension Set for ADSS Cable

Tangent Suspension Clamp & Preformed Rod Set for ADSS Cable

Tangent Suspension Clamp and Single Preformed Rod Suspension Set for ADSS Cable

Key Features

Uniform stress distribution along the cable
No concentrated pressure or bending stress
Excellent vibration-damping performance
Suitable for straight lines and small angle deviations (up to 25°)
Quick and tool-free installation for preformed rod variants
Long service life in harsh outdoor environments

The Tangent Suspension Clamp for ADSS Cable and Preformed Rods Suspension Set is engineered for secure suspension and long-term protection of ADSS and OPGW optical fiber cables in overhead transmission and distribution networks.

Designed for tangent and mild angle installations, this ADSS cable suspension system evenly distributes mechanical stress, prevents localized pressure on the cable sheath, and improves vibration resistance. Depending on span length and load conditions, the solution can be applied as a tangent suspension clamp for ADSS cable (≤100 m spans) or a single preformed rod suspension set (100–200 m spans).

The modular design of this Tangent Suspension Clamp for ADSS Cable and Preformed Rod Suspension Set ensures easy installation, excellent mechanical performance, and reliable operation in diverse environmental conditions.

International Standard Compliance

IEC standards for optical fiber fittings
GB standard fittings for steel components
ISO-compliant galvanization processes
Utility-grade mechanical performance requirements

Construction & Materials

Suspension Clamp Body: High-strength aluminum alloy
Preformed / Helical Armor Rods: Aluminum alloy
U-Clevis & Shackles: Hot-dip galvanized steel
PD-Type Plate: Hot-dip galvanized steel
Rubber / Latex Pad: UV-resistant elastomer
Breaking load options: 80 kN / 120 kN

Product Variants

Tangent Suspension Clamp for ADSS (≤100 m span)
Single / Mono-Layer Preformed Rods Suspension Set for ADSS (100–200 m span)
Pre-Twisted Suspension Clamp for ADSS & OPGW

Scope of Supply

Each complete suspension set consists of:

Preformed Rods
AGS Suspension Clamp
U-Clevis
Bolts & Fasteners
Latex / Rubber Pad

Installation Guide

Select the correct model based on cable diameter and span length
Place the latex pad on the cable at the suspension point
Apply preformed rods evenly around the cable (if applicable)
Position the AGS clamp over the rods or cable
Connect the clamp to the insulator string using a U-clevis and fittings
Tighten bolts and secure locking pins

No special tools are required for pre-twisted suspension assemblies.

Technical Parameters

Tangent Clamp for ADSS (≤100 m Span)

Model	Cable Diameter (mm)	AGS Clamp Model	AGS Clamp Weight (kg)	U-Clevis	Thimble	Max Span (m)
TAXQ 1110	9.0–11.1	XGT-02-111	1.08	GHX-04	U-4	100
TAXQ 1330	11.2–13.3	XGT-02-133	1.04	GHX-04	U-4	100
TAXQ 1550	13.4–15.5	XGT-02-155	1.00	GHX-04	U-4	100

Technical Parameters (100–200 m Span)

Model	Cable Diameter (mm)	Rod Length (mm)	Rod Weight (kg)	AGS Clamp Model	AGS Clamp Weight (kg)	U-Clevis	Thimble	Max Span (m)
TAXD 1010	9.7–10.1	800	0.30	XGT-02-197	0.98	GHX-04	U-4	200
TAXD 1110	10.7–11.1	800	0.30	XGT-02-197	0.98	GHX-04	U-4	200
TAXD 1200	11.8–12.0	860	0.36	XGT-02-219	0.94	GHX-04	U-4	200
TAXD 1360	13.0–13.6	900	0.41	XGT-02-219	0.94	GHX-04	U-4	200
TAXD 1510	14.6–15.1	1000	0.50	XGT-02-241	0.90	GHX-04	U-4	200

Applications

ADSS optical cable suspension
OPGW cable suspension
Overhead transmission lines
Distribution networks
Linear, tangent, and mild-angle pole structures
Substation and tower installations

Product Advantages

Extends optical cable service life
Reduces maintenance and replacement costs
Improves the mechanical reliability of the line
Compatible with various tower and pole configurations
Proven design for telecom and power utilities

FAQs

What span lengths are supported?
Up to 100 m for tangent clamp sets and up to 200 m for preformed rod suspension sets.

Is this product suitable for OPGW cables?
Yes, pre-twisted suspension variants are suitable for both ADSS and OPGW cables.

Does installation damage the cable sheath?
No. The design eliminates concentrated stress and protects the cable jacket.

What is the suspension angle limit?
Single-sided suspension angle is typically 15°–18°, with overall deviation up to 25°.

Can fittings be customized?
Yes, sizes and configurations can be supplied according to project requirements.

Our Services

Rich experience in ODM & OEM production
Excellent one-stop solution for telecom and power hardware
High-quality precision casting and forging capabilities
Factory-direct pricing with fast delivery
Strict quality control and inspection at every stage
Warm welcome to visit our factory for cooperation opportunities

About Us

Telexc is a high-tech enterprise specializing in the manufacturing of hardware equipment for the telecommunications and electric power sectors. With production and sales centers in Tianjin and Hebei, China, our products are successfully operating in over 30 countries and have been trusted in power systems for more than 20 years. We are an approved and certified supplier to major telecom companies worldwide and have earned excellent references from numerous utility departments. Our facilities are equipped with modern machinery, advanced testing equipment, and a skilled engineering team.

Telexc is certified under:

ISO 9001 (Quality Management)
ISO 14001 (Environmental Management)
ISO 45001 (Occupational Health & Safety)

With innovation, reliability, and customer satisfaction at our core, Telexc continues to lead the way in transmission and telecommunication line hardware manufacturing.

Why Choose Telexc

Specialized focus on telecom & power line fittings
Consistent quality control and material traceability
Engineering-driven product design
Proven performance in utility projects
Flexible manufacturing and customization capability