Plastic Flat FTTH Drop Wire Clamp

Key Features

Designed for 4 × 8 mm flat FTTH drop cables
Suitable for outdoor aerial spans up to 70 m
Made from UV-resistant plastic material for long service life
Fully insulated clamp body for safe telecom cable installation
Self-adjusting wedge grips the cable without damaging the sheath
Open-tail design allows quick hanging on hooks and brackets
Manual installation without special tools
Suitable for both outdoor and selected indoor FTTH applications
Stable holding performance in wind, temperature variation, and harsh weather
Helps simplify last-mile fiber cable installation

The Plastic Flat FTTH Drop Wire Clamp is designed to anchor and suspend 4 × 8 mm flat fiber optic drop cables in FTTH aerial network installations. It is suitable for securing telecom cables on poles, brackets, hooks, and building attachment points while maintaining a firm cable grip without damaging the cable sheath.

Made from UV-resistant engineering plastic, this flat FTTH clamp provides excellent insulation performance, weather resistance, and long-term durability in outdoor environments. Its self-adjusting wedge design allows the cable to be held securely while reducing stress on the cable jacket. The open-tail structure makes installation quick and convenient on standard hooks and brackets.

The clamp is suitable for outdoor overhead spans up to 70 m and can also be used for selected indoor FTTH cable routing applications. Designed for reliable performance in varying temperatures and weather conditions, TX-PDW48 is a practical solution for last-mile fiber cable anchoring in telecom distribution networks.

International Standard Compliance

The TX-PDW48 is manufactured in line with common quality and material control requirements for telecom cable accessories.

Manufactured under ISO 9001 quality management principles
Material selection can be supplied in accordance with RoHS compliance requirements on request
UV-resistant polymer materials suitable for outdoor telecom use
Designed for standard FTTH aerial cable installation practice
Suitable for telecom network accessories requiring insulation and weather durability

Construction & Materials

Clamp Body

Main Body: UV-Resistant Engineering Plastic

Gripping Parts

Self-Adjusting Wedge: Polymeric Material

Mounting Loop

Wire Loop / Bail: Galvanized Steel

Installation Guide

Check that the cable size matches the clamp specification for 4 × 8 mm flat fiber optic drop cable.
Open the clamp and insert the cable into the gripping section.
Ensure the cable is positioned correctly inside the wedge area.
Allow the self-adjusting wedge to grip the cable firmly.
Attach the loop to a suitable hook, bracket, or pole fitting.
Confirm that the cable is aligned properly without twisting or excessive bending.
Check the clamp after installation to ensure secure anchoring and stable suspension.

Technical Parameters

Parameter	Specification
Model No.	TX-PDW48
Product Name	Plastic Flat FTTH Drop Wire Clamp
Suitable Cable Type	Flat Fiber Optic Drop Cable
Cable Size	4 × 8 mm
Installation Type	Aerial / Pole / Wall / Indoor-Outdoor
Maximum Recommended Span	Up to 70 m
Working Load	Up to 0.5 kN
Breaking Load	1.1 kN
Clamp Body Material	UV-Resistant Engineering Plastic
Wedge Material	Polymeric Self-Adjusting Wedge
Loop Material	Galvanized Steel
Insulation Property	Yes
Operating Temperature	-40°C to +60°C
Installation Method	Manual, Tool-Free
UV Resistance	Suitable for Outdoor Exposure
Application	FTTH Drop Cable Anchoring and Suspension

Applications

FTTH aerial drop cable installations
Outdoor fiber optic cable anchoring
Subscriber drops cable connections
Pole-to-building cable routing
Wall-mounted fiber drop installations
Indoor and outdoor telecom cable support
Last-mile fiber network deployment

Product Advantages

Lightweight and corrosion-resistant design
Secure grip without harming cable insulation
Fast tool-free installation
UV-resistant material for outdoor durability
Reliable holding performance for FTTH drop spans
Suitable for telecom hooks, brackets, and pole fittings
Practical solution for fiber drop cable anchoring
Cost-effective design for mass network deployment

FAQs

1. What cable size is TX-PDW48 designed for?

TX-PDW48 is designed for 4 × 8 mm flat fiber optic drop cables.

2. Is this clamp suitable for outdoor FTTH installations?

Yes. It is made from UV-resistant engineering plastic and is suitable for outdoor FTTH aerial cable installations.

3. What is the maximum recommended span?

The maximum recommended overhead span is up to 70 meters.

4. Does the clamp damage the cable sheath?

No. The self-adjusting wedge design is intended to grip the cable securely without damaging the protective sheath.

5. Can the clamp be installed without tools?

Yes. TX-PDW48 supports manual tool-free installation, making field installation faster and easier.

6. Can it be used for indoor installation as well?

Yes. In addition to outdoor aerial use, it can also be used in selected indoor FTTH cable routing applications.

7. What is the operating temperature range?

The operating temperature range is -40°C to +60°C.

8. Where is this clamp commonly installed?

It is commonly installed on utility poles, wall brackets, hooks, and building attachment points in FTTH networks.

Why Choose Telexc

Telexc provides reliable cable anchoring and suspension hardware for telecom and power infrastructure projects. Our products are developed for practical field installation, stable long-term performance, and dependable material quality. With attention to outdoor durability, controlled manufacturing, and flexible OEM/ODM service, Telexc supports customers with efficient solutions for FTTH and aerial fiber network construction.