E648 Fiber Supporting Clamp for No.8 Fiber Cable | Telexc

E648 Supporting Clamp for No.8 Fiber Cable | Fiber Cable Tension & Fixing Clamp

Key Features

1. Strong Cable Holding Design

Provides secure grip for No.8 fiber cable, maintaining proper tension without slippage.

2. Weather-Resistant Construction

UV-resistant polymer and galvanized steel ensure durability in outdoor environments.

3. Tool-Free Installation

Designed for fast installation without specialized tools, reducing labor time.

4. Multi-Environment Use

Suitable for electric poles, street lighting lines, and building-mounted cable routes.

5. Stable Mechanical Support

Ensures consistent cable positioning even under wind and mechanical load.

The E648 Supporting Clamp is designed for No. 8 fiber-optic cable installations, ensuring stable fixation and controlled tension in overhead networks. It is widely used in FTTH, telecom distribution, and mixed utility pole environments where reliable cable support is required.

Manufactured using high-strength aluminum alloy, galvanized steel components, and UV-resistant polymer materials, it ensures long service life under outdoor environmental stress. The clamp is suitable for short-span aerial installations and supports fast, tool-free mounting.

International Standard Compliance

1. IEC Quality Compliance

Manufactured in accordance with the general IEC telecom accessory durability guidelines.

2. UV Resistance Standards

Polymer materials tested for long-term UV exposure performance.

3. Mechanical Load Standards

Designed to meet typical aerial cable tension and load requirements.

4. Corrosion Resistance Norms

Galvanized steel parts ensure protection against rust and oxidation.

5. Safety Installation Standards

Ensures safe installation in low-voltage overhead telecom networks.

Construction & Materials

1. Aluminum Alloy Body

Provides structural strength while keeping the clamp lightweight.

2. Galvanized Steel Hardware

Prevents corrosion and increases mechanical stability.

3. UV-Resistant Polymer Insert

Protects cable surface from damage and environmental degradation.

4. Precision Bolt System

Ensures tight locking and long-term secure holding performance.

5. Anti-Slip Design

Improves grip stability for aerial fiber cable installations.

Installation Guide

1. Positioning on Pole or Wall

The clamp is placed at the required mounting location on the pole or structure.

2. Cable Placement

No.8 fiber cable is inserted into the clamp groove carefully.

3. Bolt Tightening

Two bolts are tightened evenly to secure the cable.

4. Tension Adjustment

Cable tension is adjusted to maintain proper alignment.

5. Final Inspection

Check clamp stability and ensure no cable damage or slippage.

Technical Parameters

Parameter	Specification
Model No.	TX-E648
Cable Type	No.8 Fiber Cable
Cross-Section Range	4 – 8 mm²
Bolt Configuration	2 Bolts
Material	Aluminum alloy, galvanized steel, UV-resistant polymer
Installation Type	Pole / Wall mounting
Application Span	Up to 100 m
Tool Requirement	No special tools required

Applications

1. FTTH Networks

Used in fiber-to-the-home aerial distribution systems for stable cable support.

2. Telecom Overhead Lines

Supports fiber cables along telecom utility poles in urban and rural areas.

3. Street Lighting Networks

Installed alongside street lighting poles for combined utility routing.

4. Building Cable Entry Systems

Used for securing fiber cables on building exteriors.

5. Short Span Aerial Installations

Ideal for spans under 100 meters in distribution networks.

Product Advantages

1. High Mechanical Strength

Ensures stable cable fixation even under tension and wind load conditions.

2. Long Service Life

Corrosion-resistant and UV-protected materials extend operational lifespan.

3. Easy Deployment

Quick installation reduces labor cost and field deployment time.

4. Cable Protection

Prevents fiber damage through smooth polymer contact surfaces.

5. Cost Efficient Solution

Reliable performance with minimal maintenance requirements.

FAQs

1. What cable type is compatible with TX-E648?

It is designed specifically for No. 8 fiber-optic cable installations.

2. Can it be installed without special tools?

Yes, it is designed for tool-free or minimal-tool installation.

3. Is it suitable for outdoor use?

Yes, UV-resistant and corrosion-resistant materials make it ideal for outdoor environments.

4. What is the maximum span support?

It is typically used for spans up to 100 meters, depending on installation conditions.

5. Does it damage the fiber cable?

No, polymer lining ensures a safe grip without damaging the fiber sheath.

6. What mounting options are available?

It can be installed on poles, walls, and street lighting structures.

7. Is it reusable?

Yes, it can be reused if removed carefully without mechanical damage.

8. What material ensures rust protection?

Galvanized steel components provide corrosion resistance.

Why Choose Telexc

1. Engineering Precision Manufacturing

Telexc products are designed with strict dimensional accuracy for field reliability.

2. Quality Material Selection

Only tested aluminum, steel, and polymer materials are used for durability.

3. Telecom Industry Focus

Specialized in FTTH, ADSS, and aerial cable accessory solutions.

4. Consistent Product Performance

Each clamp is tested for mechanical strength and outdoor resistance.

5. Global Application Compatibility

Designed for international telecom infrastructure standards.