SC UPC Pre-embedded Fiber Optic Fast Connector
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 2
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 3
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 4
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 5
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 6
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 7
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 8
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 9
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 10
SC UPC Pre-embedded Fiber Optic Fast Connector - Image 11

SC UPC Pre-embedded Fiber Optic Fast Connector

SC UPC Pre-embedded Fiber Optic Fast Connector

  • Factory-Polished Ferrule: Eliminates the need for polishing materials and end-face grinding, significantly reducing termination time compared to conventional methods.

  • V-Groove Mechanical Splice: Utilizes precision mechanical alignment to ensure low insertion loss without requiring epoxy or adhesives.

  • Field Installable: Designed for quick and easy termination on-site, requiring only standard fiber preparation tools (stripper, wipes, cleaver) and no electrical power.

  • Reliable Environmental Performance: Engineered with a metal V-shape cavity to maintain stable performance across a wide operating temperature range.

  • Enhanced Cable Management: Features a pressing clip structure and a short screw boot for secure locking of both fiber and cable.

  • Visual Continuity Verification: Allows for optical continuity to be verified using a visual fault locator (VFL) after assembly.

https://telexc.com/contact/

Category: Tags: ,

SC UPC Pre-embedded Fiber Optic Fast Connector

The SC UPC field assembly connector is a pre-polished, factory-terminated solution. It is specifically designed for rapid on-site installation in FTTH networks and optical wiring applications. Furthermore, this connector eliminates the need for field polishing, epoxy, and electrical power. Consequently, technicians achieve reliable optical connections in both indoor and outdoor environments, such as utility poles and manholes. Utilizing proven V-groove mechanical splice technology, this component ensures stable core alignment. As a result, it minimizes connection defects caused by installer error.

Product Configuration

  • Connector Type: SC (also available in LC or FC variants).

  • Fiber Mode: Singlemode (UPC or APC ferrules) and multimode (62.5/125um and 50/125um).

  • Grinding End-Face: UPC (Ultra Physical Contact).

  • Cable Diameter Compatibility: Designed for use with 0.9mm, 2.0mm, and 3.0mm diameter cables, catering to various fiber types from 250um to 900um.

  • Physical Construction: Outer cap made of Blue PBT; Inner body made of Black PEI.

  • Physical Dimension: 50 mm in length.

Applications

  • FTTH project usable

  • Fiber optic communication systems and telecommunications networks

  • Fiber Optic Data Transmission

  • CATV networks

  • Optical Access Networks

  • Optical Cable Interconnection

  • Maintenance or emergency restoration of fiber networks

  • Repair/Replacement requirements

  • Fiber Optic Equipment

  • LAN & CCTV optical wiring inside buildings and floors

Installation / Deployment

Installation of the SC UPC field assembly connector is straightforward and can be completed in less than 1 minutes by a skilled technician using standard tools:

  1. Strip the fiber buffer coating.

  2. Cleave the fiber to the precise length using a fiber cleaver.

  3. Clean the fiber using wipes.

  4. Insert the prepared fiber into the connector body until it seats securely.

  5. Secure the fiber using the internal mechanism and screw boot. No epoxy, polishing, or power supply is required. Optical continuity can be verified post-installation using a VFL.

Selection Considerations

  • Verify whether the network infrastructure requires singlemode or multimode fiber.

  • Confirm the outer diameter of the incoming cable (0.9mm, 2.0mm, or 3.0mm) matches the connector variant.

  • Ensure the required end-face polish (UPC or APC) aligns with the system’s return loss requirements.

  • Consider the environmental conditions of the installation site (operating temperature range).

FAQ

What tools are required for installation?

Installation requires only standard fiber preparation tools: a fiber stripping tool, cleaning wipes, and a fiber cleaver. No electrical power is needed.

Is epoxy required for this connector?

No, the connector utilizes a V-groove mechanical splice, eliminating the need for epoxy or adhesives.

Can this connector be reused?

Product specifications do not indicate reusability; it is intended for permanent field termination.

What is the insertion loss?

The typical insertion loss is less than 0.3 dB, with a maximum of 0.5 dB for UPC end-faces.

Is this connector suitable for outdoor use?

Yes, it is suitable for challenging environments such as telephone poles and manholes, as it does not require a specialized working space.

Conclusion

The SC UPC field assembly connector provides a rapid, reliable, and tool-free solution for FTTH network deployment and optical fiber termination in the field. By eliminating the need for polishing and epoxy, it reduces installation time and complexity while ensuring consistent optical performance and compliance with industry standards like Telcordia GR-326-CORE.

Related products