The TX-PA2/35 and TX-PA4/35 anchoring clamps are designed for the tensioning and anchoring of low-voltage aerial bundled cable (ABC) on poles or walls using standard hooks, brackets, or similar fittings. These clamps are suitable for distribution networks where reliable mechanical holding strength, insulation protection, and fast installation are required.
The TX-PA2/35 is intended for 2-core ABC cable, while the TX-PA4/35 is designed for 4-core ABC cable. Both models use a self-adjusting wedge principle that grips the conductors firmly while helping protect the insulation from excessive stress. Their construction combines UV-resistant glass fiber reinforced polymer parts with hot-dip galvanized steel components for strong outdoor durability.
These clamps are developed for long-term service in overhead distribution systems and help simplify installation work through controlled tightening and easy conductor positioning.
Model Number
TX-PA2/35, TX-PA4/35
International Standard Compliance
- ISO 9001:2015
- RoHS Compliant
- DIN VDE 0211
- NF C 33-042
- Suitable for LV ABC overhead line installations
Construction & Materials
The TX-PA2/35 and TX-PA4/35 clamps are built with durable materials selected for mechanical strength, insulation protection, and long-term outdoor use.
Main construction includes:
- Clamp body/wedge housing: UV-resistant glass fiber reinforced polymer
- Mechanical arms / load-bearing parts: Hot-dip galvanized steel
- Fastening system: Shear-head nut and bolt arrangement for controlled tightening
- Internal gripping structure: Self-adjusting wedge design for firm conductor anchoring
- Cable channels: Separate conductor paths to help distribute load evenly and reduce insulation stress
Material advantages:
- Polymer parts provide weather resistance, UV stability, and electrical insulation support
- Galvanized steel components deliver high mechanical strength and corrosion resistance
- The combined structure helps ensure secure cable retention, long service life, and reduced maintenance needs in outdoor distribution networks.
Installation Guide
- Prepare the Clamp – Unscrew the shear-head nuts to open the clamp body.
- Insert Conductors – Place each conductor of the ABC cable into its respective channel.
- Close Clamp – Close the clamp body and ensure the conductors are seated properly in the wedge grooves.
- Tighten Nuts – Hand-tighten the shear-head nuts, then torque to 22 Nm to secure the clamp.
- Mounting – Attach the clamp to the pole or wall using standard hooks, brackets, or supplied hardware.
- Verify Installation – Ensure all conductors are secure, evenly distributed, and insulation is protected.
- Final Check – Confirm the clamp provides proper tension and load distribution for the cable span.
Notes:
- The TX-PA2/35 is for 2-core cables, the TX-PA4/35 for 4-core cables.
- Designed for LV ABC lines up to 1 kV.
- Suitable for dead-end, anchor, and tension points in overhead distribution networks.
Why Choose Telexc
Telexc supplies dependable overhead line hardware designed for practical field use and long-term service in power distribution networks. The TX-PA2/35 and TX-PA4/35 anchoring clamps are developed to provide stable performance, easy installation, and durable mechanical support for ABC cable systems.
Why choose Telexc:
- Reliable product quality with controlled manufacturing standards
- Multiple model options for different cable core configurations
- Durable materials selected for outdoor and utility applications
- Practical designs that simplify installation and maintenance
- Consistent performance in low-voltage ABC distribution networks
- Support for OEM, wholesale, and project-based supply requirements
